deps: [email protected]

Author: wraithgar

node_modules/semver/classes/comparator.js

@@ -16,6 +16,7 @@ class Comparator {
       }
     }
 
+    comp = comp.trim().split(/\s+/).join(' ')
     debug('comparator', comp, options)
     this.options = options
     this.loose = !!options.loose
@@ -133,7 +134,7 @@ class Comparator {
 module.exports = Comparator
 
 const parseOptions = require('../internal/parse-options')
-const { re, t } = require('../internal/re')
+const { safeRe: re, t } = require('../internal/re')
 const cmp = require('../functions/cmp')
 const debug = require('../internal/debug')
 const SemVer = require('./semver')

node_modules/semver/classes/range.js

@@ -26,19 +26,26 @@ class Range {
     this.loose = !!options.loose
     this.includePrerelease = !!options.includePrerelease
 
-    // First, split based on boolean or ||
+    // First reduce all whitespace as much as possible so we do not have to rely
+    // on potentially slow regexes like \s*. This is then stored and used for
+    // future error messages as well.
     this.raw = range
-    this.set = range
+      .trim()
+      .split(/\s+/)
+      .join(' ')
+
+    // First, split on ||
+    this.set = this.raw
       .split('||')
       // map the range to a 2d array of comparators
-      .map(r => this.parseRange(r.trim()))
+      .map(r => this.parseRange(r))
       // throw out any comparator lists that are empty
       // this generally means that it was not a valid range, which is allowed
       // in loose mode, but will still throw if the WHOLE range is invalid.
       .filter(c => c.length)
 
     if (!this.set.length) {
-      throw new TypeError(`Invalid SemVer Range: ${range}`)
+      throw new TypeError(`Invalid SemVer Range: ${this.raw}`)
     }
 
     // if we have any that are not the null set, throw out null sets.
@@ -64,9 +71,7 @@ class Range {
 
   format () {
     this.range = this.set
-      .map((comps) => {
-        return comps.join(' ').trim()
-      })
+      .map((comps) => comps.join(' ').trim())
       .join('||')
       .trim()
     return this.range
@@ -77,8 +82,6 @@ class Range {
   }
 
   parseRange (range) {
-    range = range.trim()
-
     // memoize range parsing for performance.
     // this is a very hot path, and fully deterministic.
     const memoOpts =
@@ -105,9 +108,6 @@ class Range {
     // `^ 1.2.3` => `^1.2.3`
     range = range.replace(re[t.CARETTRIM], caretTrimReplace)
 
-    // normalize spaces
-    range = range.split(/\s+/).join(' ')
-
     // At this point, the range is completely trimmed and
     // ready to be split into comparators.
 
@@ -203,7 +203,7 @@ const Comparator = require('./comparator')
 const debug = require('../internal/debug')
 const SemVer = require('./semver')
 const {
-  re,
+  safeRe: re,
   t,
   comparatorTrimReplace,
   tildeTrimReplace,
@@ -257,10 +257,13 @@ const isX = id => !id || id.toLowerCase() === 'x' || id === '*'
 // ~1.2.3, ~>1.2.3 --> >=1.2.3 <1.3.0-0
 // ~1.2.0, ~>1.2.0 --> >=1.2.0 <1.3.0-0
 // ~0.0.1 --> >=0.0.1 <0.1.0-0
-const replaceTildes = (comp, options) =>
-  comp.trim().split(/\s+/).map((c) => {
-    return replaceTilde(c, options)
-  }).join(' ')
+const replaceTildes = (comp, options) => {
+  return comp
+    .trim()
+    .split(/\s+/)
+    .map((c) => replaceTilde(c, options))
+    .join(' ')
+}
 
 const replaceTilde = (comp, options) => {
   const r = options.loose ? re[t.TILDELOOSE] : re[t.TILDE]
@@ -298,10 +301,13 @@ const replaceTilde = (comp, options) => {
 // ^1.2.0 --> >=1.2.0 <2.0.0-0
 // ^0.0.1 --> >=0.0.1 <0.0.2-0
 // ^0.1.0 --> >=0.1.0 <0.2.0-0
-const replaceCarets = (comp, options) =>
-  comp.trim().split(/\s+/).map((c) => {
-    return replaceCaret(c, options)
-  }).join(' ')
+const replaceCarets = (comp, options) => {
+  return comp
+    .trim()
+    .split(/\s+/)
+    .map((c) => replaceCaret(c, options))
+    .join(' ')
+}
 
 const replaceCaret = (comp, options) => {
   debug('caret', comp, options)
@@ -358,9 +364,10 @@ const replaceCaret = (comp, options) => {
 
 const replaceXRanges = (comp, options) => {
   debug('replaceXRanges', comp, options)
-  return comp.split(/\s+/).map((c) => {
-    return replaceXRange(c, options)
-  }).join(' ')
+  return comp
+    .split(/\s+/)
+    .map((c) => replaceXRange(c, options))
+    .join(' ')
 }
 
 const replaceXRange = (comp, options) => {
@@ -443,12 +450,15 @@ const replaceXRange = (comp, options) => {
 const replaceStars = (comp, options) => {
   debug('replaceStars', comp, options)
   // Looseness is ignored here.  star is always as loose as it gets!
-  return comp.trim().replace(re[t.STAR], '')
+  return comp
+    .trim()
+    .replace(re[t.STAR], '')
 }
 
 const replaceGTE0 = (comp, options) => {
   debug('replaceGTE0', comp, options)
-  return comp.trim()
+  return comp
+    .trim()
     .replace(re[options.includePrerelease ? t.GTE0PRE : t.GTE0], '')
 }
 
@@ -486,7 +496,7 @@ const hyphenReplace = incPr => ($0,
     to = `<=${to}`
   }
 
-  return (`${from} ${to}`).trim()
+  return `${from} ${to}`.trim()
 }
 
 const testSet = (set, version, options) => {

node_modules/semver/classes/semver.js

@@ -1,6 +1,6 @@
 const debug = require('../internal/debug')
 const { MAX_LENGTH, MAX_SAFE_INTEGER } = require('../internal/constants')
-const { re, t } = require('../internal/re')
+const { safeRe: re, t } = require('../internal/re')
 
 const parseOptions = require('../internal/parse-options')
 const { compareIdentifiers } = require('../internal/identifiers')
@@ -291,8 +291,10 @@ class SemVer {
       default:
         throw new Error(`invalid increment argument: ${release}`)
     }
-    this.format()
-    this.raw = this.version
+    this.raw = this.format()
+    if (this.build.length) {
+      this.raw += `+${this.build.join('.')}`
+    }
     return this
   }
 }

node_modules/semver/functions/coerce.js

@@ -1,6 +1,6 @@
 const SemVer = require('../classes/semver')
 const parse = require('./parse')
-const { re, t } = require('../internal/re')
+const { safeRe: re, t } = require('../internal/re')
 
 const coerce = (version, options) => {
   if (version instanceof SemVer) {

node_modules/semver/functions/diff.js

@@ -13,6 +13,35 @@ const diff = (version1, version2) => {
   const highVersion = v1Higher ? v1 : v2
   const lowVersion = v1Higher ? v2 : v1
   const highHasPre = !!highVersion.prerelease.length
+  const lowHasPre = !!lowVersion.prerelease.length
+
+  if (lowHasPre && !highHasPre) {
+    // Going from prerelease -> no prerelease requires some special casing
+
+    // If the low version has only a major, then it will always be a major
+    // Some examples:
+    // 1.0.0-1 -> 1.0.0
+    // 1.0.0-1 -> 1.1.1
+    // 1.0.0-1 -> 2.0.0
+    if (!lowVersion.patch && !lowVersion.minor) {
+      return 'major'
+    }
+
+    // Otherwise it can be determined by checking the high version
+
+    if (highVersion.patch) {
+      // anything higher than a patch bump would result in the wrong version
+      return 'patch'
+    }
+
+    if (highVersion.minor) {
+      // anything higher than a minor bump would result in the wrong version
+      return 'minor'
+    }
+
+    // bumping major/minor/patch all have same result
+    return 'major'
+  }
 
   // add the `pre` prefix if we are going to a prerelease version
   const prefix = highHasPre ? 'pre' : ''
@@ -29,26 +58,8 @@ const diff = (version1, version2) => {
     return prefix + 'patch'
   }
 
-  // at this point we know stable versions match but overall versions are not equal,
-  // so either they are both prereleases, or the lower version is a prerelease
-
-  if (highHasPre) {
-    // high and low are preleases
-    return 'prerelease'
-  }
-
-  if (lowVersion.patch) {
-    // anything higher than a patch bump would result in the wrong version
-    return 'patch'
-  }
-
-  if (lowVersion.minor) {
-    // anything higher than a minor bump would result in the wrong version
-    return 'minor'
-  }
-
-  // bumping major/minor/patch all have same result
-  return 'major'
+  // high and low are preleases
+  return 'prerelease'
 }
 
 module.exports = diff

node_modules/semver/internal/re.js

@@ -4,16 +4,27 @@ exports = module.exports = {}
 
 // The actual regexps go on exports.re
 const re = exports.re = []
+const safeRe = exports.safeRe = []
 const src = exports.src = []
 const t = exports.t = {}
 let R = 0
 
 const createToken = (name, value, isGlobal) => {
+  // Replace all greedy whitespace to prevent regex dos issues. These regex are
+  // used internally via the safeRe object since all inputs in this library get
+  // normalized first to trim and collapse all extra whitespace. The original
+  // regexes are exported for userland consumption and lower level usage. A
+  // future breaking change could export the safer regex only with a note that
+  // all input should have extra whitespace removed.
+  const safe = value
+    .split('\\s*').join('\\s{0,1}')
+    .split('\\s+').join('\\s')
   const index = R++
   debug(name, index, value)
   t[name] = index
   src[index] = value
   re[index] = new RegExp(value, isGlobal ? 'g' : undefined)
+  safeRe[index] = new RegExp(safe, isGlobal ? 'g' : undefined)
 }
 
 // The following Regular Expressions can be used for tokenizing,

node_modules/semver/package.json

@@ -1,6 +1,6 @@
 {
   "name": "semver",
-  "version": "7.5.1",
+  "version": "7.5.2",
   "description": "The semantic version parser used by npm.",
   "main": "index.js",
   "scripts": {
@@ -14,7 +14,7 @@
   },
   "devDependencies": {
     "@npmcli/eslint-config": "^4.0.0",
-    "@npmcli/template-oss": "4.14.1",
+    "@npmcli/template-oss": "4.15.1",
     "tap": "^16.0.0"
   },
   "license": "ISC",
@@ -37,7 +37,7 @@
     "range.bnf"
   ],
   "tap": {
-    "check-coverage": true,
+    "timeout": 30,
     "coverage-map": "map.js",
     "nyc-arg": [
       "--exclude",
@@ -53,7 +53,7 @@
   "author": "GitHub Inc.",
   "templateOSS": {
     "//@npmcli/template-oss": "This file is partially managed by @npmcli/template-oss. Edits may be overwritten.",
-    "version": "4.14.1",
+    "version": "4.15.1",
     "engines": ">=10",
     "ciVersions": [
       "10.0.0",

package-lock.json

@@ -139,7 +139,7 @@
         "proc-log": "^3.0.0",
         "qrcode-terminal": "^0.12.0",
         "read": "^2.1.0",
-        "semver": "^7.5.1",
+        "semver": "^7.5.2",
         "sigstore": "^1.5.0",
         "ssri": "^10.0.4",
         "supports-color": "^9.3.1",
@@ -11366,9 +11366,9 @@
       }
     },
     "node_modules/semver": {
-      "version": "7.5.1",
-      "resolved": "https://registry.npmjs.org/semver/-/semver-7.5.1.tgz",
-      "integrity": "sha512-Wvss5ivl8TMRZXXESstBA4uR5iXgEN/VC5/sOcuXdVLzcdkz4HWetIoRfG5gb5X+ij/G9rw9YoGn3QoQ8OCSpw==",
+      "version": "7.5.2",
+      "resolved": "https://registry.npmjs.org/semver/-/semver-7.5.2.tgz",
+      "integrity": "sha512-SoftuTROv/cRjCze/scjGyiDtcUyxw1rgYQSZY7XTmtR5hX+dm76iDbTH8TkLPHCQmlbQVSSbNZCPM2hb0knnQ==",
       "inBundle": true,
       "dependencies": {
         "lru-cache": "^6.0.0"

package.json

@@ -106,7 +106,7 @@
     "proc-log": "^3.0.0",
     "qrcode-terminal": "^0.12.0",
     "read": "^2.1.0",
-    "semver": "^7.5.1",
+    "semver": "^7.5.2",
     "sigstore": "^1.5.0",
     "ssri": "^10.0.4",
     "supports-color": "^9.3.1",